The 250FR16 Joist Flange Reinforcer is a Patented, Engineered, and Tested product!
250 FR16 I-Joist Flange Reinforcers are designed to repair a notch cut from the top flange portion of a 16″ tall I-Joist with a 2.5″ flange.
Metwood Joist Reinforcers are engineered light gauge steel attachments
for engineered I-Joists.
By allowing larger openings in floor joists, the Joist Reinforcer simplifies the routing and installation of
Metwood Joist Reinforcers repair / restore the strength of floor joists weakened by
the placement of large holes or notch cut-outs.
Metwood Joist Reinforcers are simply screwed to
the side of the floor joist, no glue needed. (screws and drill bit are included).
250 FR16 I-JOIST FLANGE REINFORCERS are designed to repair a notch cut from the top flange portion of an I-Joist.
250 series Reinforcers are designed for I-Joist flanges that measure 2.5″
If using the 250 series on a flange larger or smaller than that of 2.5″, the web area or the flange area may need to be padded out so the 250 series Reinforcer fits tight against the joist.
Click Here to see our Return Policy